# EV charging app development company UK operators and fleets can hire for driver apps and charger back offices

Canonical: https://appagentix.co.uk/industries/ev-app-development/

Our EV charging app development starts at the charger. We list every charger model and OCPP version you run, fix the price, and hand you a test report from those chargers before launch. We build for UK operators, fleets and charging sites.

- First release in 8 to 14 weeks
- Contactless, 99% reliability, open data and p/kWh pricing planned in discovery
- Code, designs, store and cloud accounts in your name

## What does an EV charging app development project involve?

A two-week discovery lists each charger model and its OCPP version, then fixes the price. Every bill uses the charger’s own meter reading, not a guess. A first release costs £15,000 to £40,000 excluding VAT and takes 8 to 14 weeks.

- Discovery: 2 weeks, off the build price
- First release: 8 to 14 weeks
- Full app: 4 to 8 months
- Support: Optional, monthly

## Which EV driver apps and charge point operator apps do we build?

The UK had 119,080 public chargers on 1 April 2026.

### Driver app

Find, check the plug, scan and pay, and status comes from the charger itself.

### Operator back office

Sessions, tariffs, faults and refunds, with faulted rapid chargers flagged fast.

### Fleet and depot charging

Each charge tied to a van and its driver at the depot.

### Workplace and destination chargers

Staff charge free, guests pay, with no front-desk step.

### Roaming and partner access

Your tariffs and status sent to partner apps through OCPI.

## One fault, from charger to console

The charger, the driver app and the operator console show the same state.

1. Charger reports a fault
2. Status published
3. Console flags it
4. Engineer booked
5. Back in service

## Which UK rules shape EV charging app development?

Most come from the Public Charge Point Regulations 2023, which, apart from pricing, spare micro-business operators, and we map each rule in discovery.

### Contactless at the charger

Applies to: New public chargers of 8kW and above deployed after 24 November 2024, and all of 50kW and above

What it changes in the build: The app cannot be the only way to pay, and a broken card reader counts as downtime.

### 99% reliability on rapid chargers

Applies to: Public chargers of 50kW and above, as a network mean over a year

What it changes in the build: Measured from OCPI statuses, with a yearly report due by 14 January, so we log every status change.

### Open data in OCPI 2.2.1

Applies to: Every public charger, each EVSE on its own

What it changes in the build: Location, tariff and status data must be open, and a status change shows within 30 seconds.

### Price in p/kWh before the session

Applies to: All public charge point operators, micro-businesses included

What it changes in the build: The maximum price, fixed fees included, shows before charging, and the price charged may never go above it.

### Helpline and roaming

Applies to: Public charge point operators

What it changes in the build: A free, staffed 24/7 helpline shown at every charger, plus at least one outside roaming provider.

### Smart Charge Points Regulations 2021

Applies to: Home and workplace chargers sold from 30 June 2022, not public or rapid ones

What it changes in the build: Default hours sit outside weekday peaks (8am to 11am, 4pm to 10pm). A random delay of up to 600 seconds applies, and the owner can override both.

### UK GDPR

Applies to: Any app that links location and charge history to a driver

What it changes in the build: Our practice: we collect location only while the app is open and set a retention period for charge history.

## EV and energy apps we have built

A few examples from the many apps we have built for charging and for energy use.

### Tiger Charge: find, start and pay in one app

EV charging network

Drivers kept reaching offline chargers or the wrong plug, and billing was done by hand. We built an Android app with a live station map, scan to charge and a prepaid wallet, linked to the chargers by our OCPP gateway.

10,000+ Google Play downloads, 4.1 stars, over 40% of sessions begun in the app with no support call, 70% less manual billing

[Read the Tiger Charge case study](https://appagentix.co.uk/our-work/tiger-charge/)

### Digilite: live energy use in the home

Smart home and IoT

Families using Digilite Automation, the Android app we built, follow their power use as it happens, on smart plug energy pages and graphs for the whole home. Schedules and routines switch appliances on a timer, or when room temperature, motion or a door changes. Energy readings are held in a time-series database next to PostgreSQL, and MQTT carries the device messages.

[Read the Digilite case study](https://appagentix.co.uk/our-work/digilite/)

## How one charge starts and settles

With a prepaid wallet, funds are held first.

1. **Scan and choose.** Time or energy.
2. **Hold the funds.** The estimated cost is held.
3. **Remote start.** RemoteStartTransaction to the charger.
4. **Charger starts.** StartTransaction with the opening meter reading.
5. **Meter readings.** MeterValues keep the screen live.
6. **Stop and settle.** StopTransaction closes it; the unused hold is freed.

## How one session's bill is worked out under the p/kWh rule

**One charge, billed by the charger meter**

| Step | Figure |
| --- | --- |
| Energy delivered: closing meter reading less opening reading | 28.4 kWh |
| Price per kWh shown before Start, fixed fees included | 62p |
| 28.4 x 62p | £17.608 |
| Bill for the session, to the nearest penny | £17.61 |

Illustrative figures. The price charged per kWh can never go above the maximum shown before Start.

## What is EV charging management software?

It is the software that runs your chargers. Buy, white label or build? Our advice:

Which route fits your network?

- If Fewer than about 20 sites, standard tariffs, no app of your own, choose **Buy a ready platform**. A monthly licence costs less than a build.
- If Chargers from one maker whose platform offers a branded app, choose **White label**. Your brand on a working app; the roadmap stays with the vendor.
- If Own brand, payment rules, fleet logic or several charger makers, choose **A custom build**. You own the code and data.
- If A bought platform runs the chargers, but its driver app is weak, choose **Platform plus your own app**. We build the app on the platform's API.

## Which screen does each UK charging rule change?

Where each rule above lands.

| UK rule | Screen |
| --- | --- |
| Contactless | "Pay by card at the charger" beside Start |
| Price in p/kWh | Tariff in p/kWh shown before Start |
| Open data | Station status updated within 30 seconds |
| 99% reliability | Fault state and downtime clock in the console |
| Helpline | Tap to call on station and fault screens |
| Roaming | Partner tariffs and access through OCPI |

## What 99% reliability means in hours

**Downtime allowed by the 99% rule**

| Step | Figure |
| --- | --- |
| Hours in a year (365 days at 24 hours) | 8,760 hours |
| Share the rule allows to be down (100% less 99%) | 1% |
| Most downtime a year, on average per rapid charger | 87.6 hours |
| About a month | 7.3 hours |

The rule is a mean across your rapid chargers over a calendar year. A failed card reader counts as downtime, so the console shows readers as well as connectors.

## What a charger test report looks like

Shown for the imaginary 40-site network below.

**Charger test report, release candidate 1.0**

| Test | Where run | Result | What happens next |
| --- | --- | --- | --- |
| Remote start on each model | Simulator, then three models | Pass | None needed. |
| Charger reboots mid-session | Real charger, OCPP 1.6 | Pass after fix | Session left open. Fixed to close on the last reading. |
| Network cut for ten minutes | Simulator | Pass | Bill matched the meter. |
| Duplicate payment event | Gateway test mode | Pass | One payment recorded. |
| Connector type on the map | All 40 sites | Pass after fix | Two sites showed the wrong plug; corrected. |
| Status stuck after unplug | One real model | Open | Raised with the maker; launch waits. |

An example, not a client record, and nothing goes live before you read it.

## What does OCPP mean?

OCPP, the Open Charge Point Protocol, is how a charger talks to its software. Versions 1.6 (2015) and 2.0.1 (2020, IEC 63584 since 2024) are not compatible, and 2.1 came in 2025.

Our gateway speaks 1.6 and 2.0.1, on Security Profile 2 or 3.

## What each OCPP charger status shows in an EV charging app

Each connector reports one of nine OCPP 1.6 states, while drivers see plain words.

| OCPP 1.6 connector status | What the driver sees |
| --- | --- |
| Available | Free |
| Preparing | Plugging in. Cable in or card shown, no charge yet. |
| Charging | In use |
| SuspendedEV or SuspendedEVSE | In use, paused. The console says whether the car or the charger paused it. |
| Finishing | Finishing. Charge stopped, cable still in. |
| Reserved | Reserved |
| Unavailable | Out of service |
| Faulted | Out of service. Fault logged and the operator alerted. |

## How much does it cost to build an app in the UK?

For EV charging app development, here is what each stage includes. One worked example, an imaginary 40-site network, came to £34,000 fixed. Price your own EV charging app development project with the calculator below.

| Option | Price | Time | Includes |
| --- | --- | --- | --- |
| Discovery |  | 2 weeks | Charger survey and a fixed quote. Comes off the build price. |
| EV charging MVP |  | 8 to 14 weeks | Driver app, OCPP link, card payment and store launch. |
| Full app |  | 4 to 8 months | Both phones, wallet, back office and roaming. |
| Support |  | monthly | Updates and fixes. 30 days' notice after 3 months. |

Three months of fixes are included. Every rate is on our app development cost page.

## Estimate your EV charging app in a minute

Pick what the first release needs.

Discovery, design, live map, scan to start, OCPP 1.6, card checkout, launch: £16,000 to £24,000, 9 to 11 weeks.

### Phones

- Android only: included
- Android and iPhone, one codebase: £2,000 to £4,000

### Charger link

- OCPP 1.6: included
- OCPP 1.6 and 2.0.1: £4,000 to £7,000

### Payments

- Card or Apple Pay per charge: included
- Prepaid wallet with a ledger: £8,000 to £14,000

### Features

- Charge done and payment alerts: £5,000 to £9,000
- Search, filters and directions: £8,000 to £14,000
- Back office: tariffs, faults, refunds: £9,000 to £15,000
- Roaming link to one hub (OCPI): £6,000 to £10,000
- Open data feed, OCPI 2.2.1: £6,000 to £10,000
- Link to one system you run: £2,500 to £4,000
- One membership plan: £4,000 to £7,000
- Reports in a hosted dashboard: £1,500 to £3,000
- One extra language, such as Welsh: £1,000 to £2,500
- Simple AI assistant, one task: £8,000 to £12,000
- AI agent on one workflow: £15,000 to £30,000

An estimate, not a quote, excluding VAT and provider fees. Options are priced at £500 a day (£600 for AI), and larger builds are quoted after discovery.

## What we say no to, and what is paid to others

Agreed in writing before the build.

- **No custom charger firmware.** Firmware faults go to the maker.
- **No hardware sales or installation.** We connect to the chargers you choose.
- **No certification promises.** Certification is the charger maker's. We test your models.
- **No stored card numbers.** Cards stay with a licensed payment gateway.
- **Paid to others.** Payment, map, message and hosting fees, on the quote.
- **Yours from day one.** Code, designs and the Apple, Google and cloud accounts.
- **Refund promise.** If we do not deliver what the written scope promises, we refund what you paid for the undelivered work within 7 days.

## EV charging software development, step by step

In EV charging app development we prove the charger link first: on a simulator that replays every fault, then on each charger model you run.

1. Discovery
2. Charger link
3. App and back office
4. Real-charger tests
5. Launch

How every build runs: [see the full process](https://appagentix.co.uk/#how-we-work)

## Questions about EV charging app development

### What is the difference between OCPP and OCPI?

OCPP links a charger to the system that runs it, while OCPI links that system to other companies, such as roaming partners and driver apps. UK public charge point operators must open their data in OCPI 2.2.1, so most public networks need both.

[How we built the OCPP gateway for Tiger Charge](/our-work/tiger-charge/)

### How does OCPP work?

The charger opens a WebSocket link to the central system and keeps it open. Short messages flow both ways: BootNotification at start-up, StatusNotification when a connector changes, and StartTransaction, MeterValues and StopTransaction around each charge.

### Which EV chargers support OCPP?

OCPP 1.6 remains widely used, and the industry is moving towards OCPP 2.0.1 and 2.1. Before launch, we prove the charger link on a simulator, then on each charger model you run.

### Is there a universal app for EV charging?

Not one that works at every charger, and roaming comes closest: one app or card pays across several networks. UK public charge point operators must accept at least one outside roaming provider, so your app can reach other networks through OCPI.

### Can I charge an EV without an app?

Often, yes. Public chargers of 8kW and above deployed after 24 November 2024, and all of 50kW and above, must take contactless bank cards with no account. An app still adds live availability, the price before you arrive, receipts and help when a charge fails.

[App development cost in the UK](/app-development-cost/)

## Related pages

- [Automotive app development](https://appagentix.co.uk/industries/automotive-app-development/)
- [Logistics app development](https://appagentix.co.uk/industries/logistics-app-development/)
- [Fintech app development](https://appagentix.co.uk/industries/fintech-app-development/)
- [MVP development](https://appagentix.co.uk/services/mvp-development/)
- [App development cost in the UK](https://appagentix.co.uk/app-development-cost/)
- [Tiger Charge EV charging app case study](https://appagentix.co.uk/our-work/tiger-charge/)
- [Android app development](https://appagentix.co.uk/services/android-app-development/)
- [App development Bristol](https://appagentix.co.uk/locations/app-development-bristol/)

By Hemant Paliwal, Senior SEO Expert, AppAgentix. Reviewed November 2026.

[Book a call](https://appagentix.co.uk/requestaquote/)
